How to Make an Origami Boomerang_Easy Origami Step by Step Instructions

Step 1

Place the paper with the desired display side face down. Fold it in half horizontally and unfold it, then cut the paper along the crease you made.

Step 2

Take out one of the rectangles, fold it in half horizontally, and unfold it.

Step 3

Fold the top and bottom edges to align with the middle horizontal crease.

Step 4

Fold the paper in half vertically from right to left.

Step 5

Fold the fold the top and bottom right corners diagonally along the black dotted lines to meet the middle horizontal crease, crease them well, and unfold them.

Step 6

Unfold the top layer to the right side, then unfold the top layer of the bottom one.

Step 7

Rotate the paper 180 degrees from back to front, then mountain fold the four creases indicated by the red dotted lines to form a small square, and finally, lift the left and right points of this square along the middle vertical crease.

Step 8

Flip over the paper from left to right.

Step 9

Press down the left section of the top edge [picture 1], then press down the midpoint of the top edge to the left side [picture 2].

Next, lift the right section of the top edge and make the two red spots meet [pictures 3 and 4].

Step 10

Fold up the bottom right edge, then slightly lift the top slanted layer at the right side, and fold the crease indicated by the red line to align with the edge indicated by the black line [pictures 1 and 2].

At the same time, fold down the right white rectangle, making its top left corner tuck into the small pocket at the bottom. Finally, flatten the fold [pictures 3 and 4].

Step 11

Rotate it 45 degrees clockwise.

Step 12

Rotate the paper 90 degrees from right to left, then expand the vertical part.

Step 13

Fold down the top left and right points diagonally along the black dotted lines, then unfold them.

Step 14

Unfold the right layer of the vertical part, then fold down the crease indicated by the red dotted line along the creases you made in the previous step, and fold the right layer back to the left side.

Step 15

Close the opening of the vertical part and tuck the top left corner into the pocket at the top right. Then, rotate the paper 90 degrees from left to right.

Step 16

Rotate the paper 90 degrees from back to front, then expand this horizontal part.

Step 17

Fold the top and bottom right points diagonally along the dotted lines, then unfold them.

Step 18

Rotate the paper 90 degrees counterclockwise.

Step 19

As you did in step 14, unfold the right layer of the vertical part, then fold down the crease indicated by the red dotted line along the creases you made in the previous step, and fold the right layer back to the left side.

Step 20

Close the opening of the vertical part and tuck the top left corner into the pocket at the top right. Then, rotate the paper 90 degrees from left to right.